Paper Machine Wire And Felt Guide Auto Guide

Paper Machine Wire And Felt Guide Auto Guide

Auto guides for Wire & Felt are used for guiding the wire & felt accurately so that the damage and consequent loss in production is completely avoided. Installing the reliable and well proven pneumatic automatic guiding system is an easy way to solve the wire & felt guide problem. Working aperture: 100mm–250mm,Complete set includes: one actuator, one high support, one set of sensors, one air control box.

Mounting
The guide should be mounted on a roll which ideally is positioned between two stationery rolls. The angle of wrap should be 1300 to 1450 for wires and 1300 to 1450 for felt to best guiding effect. The distance between the two stationary rolls should preferably be equal to the width of the wed. The palm must hang vertically to provide sensitive motion. Position of the wed is adjusted by moving the controller horizontally. The actuator can be mounted in any desired position –horizontally, vertically or angle in between.

Operation
The actuator should operate in the middle position to insure the possible field of action. The adjustment can be made by operating the hand guide as shown in the assembly drawing. The actuator is connected to controller through removable hoses. The control valve & palm assembly are mounted in such a way that the palm is always in contact with wire or felt. So, that it continuously sense the cross movement the wire or felt. The controller works with a proportional modulated action and gives an extremely accurate control. During the operation the controller casing is pressurized to avoid penetration of dust and moisture to the inside. The controller palm is delicately balanced and follows the edges of wire or felt with a very gentle pressure.

1.A series of pneumatic calibrators with working aperture from 100mm to 250mm can be provided
2.It can be divided into horizontal type and swing type according to pneumatic tire installation and movement direction.
3.According to the needs of users, there are with or without manual fine-tuning.
4.The pneumatic tyres used by the pneumatic corrector are of high quality and can be used with confidence.
5.Common material corrector, can also provide users with special requirements of the product.

Other Paper Machine Equipment you may interested:
Felt TENSIONER, Shower, Headbox, Cylinder Mould, Dewatering Elements, Paper machine roll, Dryer Cylinder, Doctor Blade, Doctor Blade Holder, Pressure Screen, Screen Basket, Cleaner, Cleaner cone, Refiner, DDR, Refiner Disc, Pulper, and so on.

Picture of Felt Auto Guide:

Contact us if you need more details on Felt Guide Equipment. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Forming Fabric Guide、Paper Machine Felt Guide. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Paper Making Equipments > Paper Machine Spare Parts